INCH-POUND
A-A-51195B
13 April 2011 SUPERSEDING A-A-51195A
2 June 1998
COMMERCIAL ITEM DESCRIPTION
PRESS, ARBOR, "C" FRAME HYDRAULIC, HAND OPERATED
The General Services Administration has authorized the use of this commercial item description for all federal agencies.
1. SCOPE. This commercial item description (CID) covers both "C" (gap) and "4" post frame type hydraulic bench- or pedestal-mounted, hand-operated, arbor presses of the standard commercial type, which are used to force arbors into and out of holes or to assemble and disassemble press fit parts.
2. CLASSIFICATION. The arbor presses shall be classified by the following types and sizes:
2.1 Type. The arbor press shall be one of the following types, as specified (see (7.3(c)): Type I - "C" (gap) frame
Type II - "4" post frame
2.2 Size. The arbor press shall be one of the following sizes, as specified (see (7.3(d)): Size 10 - 10 ton
Size 25 - 25 ton
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: STDZNMGT@dla.mil or Defense
Logistics Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616. Since contact information can change, you may want to verify the currency of this address information using the ASSIST database at https://assist.daps.dla.mil/.
FSC 3444
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business