A-A-51196
Tonnage test. Each press selected for the sample inspection shall be tested to determine compliance with the tonnage requirements for the size specified.
Alignment test. Each press selected for sample inspection shall be tested to determine compliance with the alignment requirements of paragraph 1.
NOTES.
Ordering data. Purchasers should select the preferred options permitted herein, and include the following information in procurement documents:
a. Specify title, number, and date of this commercial item description
b. Specify size
c. Specify radius of work
d. Specify vertical capacity
e. Specify quantity required
CID based part identification number [PIN). The following part identification numbering procedure is for Government purposes and does not constitute a requirement for the contractor. The radius of work designation found in table I and the vertical capacity designation found in table II are for us in developing the part identification numbering only.
A XXXXX X X X
A= Prefix
XXXXX = CID number
X = Size (see classification)
X = Vertical capacity (see table II)
X = Radius of work (see table I)
FED-STD-376 and MIL-STD-105 are available from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19120-5099.
Supersession data. This commercial item description covers item previously - covered In MIL-P-80261, type III, class I, style A.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business